SCR/Thyristor-based Charger
Robust Controlled Charging for Heavy Industrial Use
SCR/thyristor-based chargers from Volt Control System are built for rugged duty, offering precise charging control and durable performance in high-demand environments.
Key Features:
- High performance and application-specific engineering
- Reliable operation under varying input conditions
- Quality-focused manufacturing and rigorous testing
- Built for long service life and low maintenance
- Stable output to protect critical equipment
- Optimized energy efficiency for industrial use
| Product | Single Phase SCR Based Battery Charger | ||
|---|---|---|---|
| Capacity | 2-5 KW | 6 - 7.5 KW | 10 KW |
| Input Voltage | 230VAC 1PH +/-10% | ||
| Input Frequency | 50Hz Any Factory Configurable | ||
| Float Voltage | Any Factory Configurable | ||
| Boost Voltage | Any Factory Configurable | ||
| Float Current | Any Factory Configurable | ||
| Boost Current | Any Factory Configurable | ||
| Regulation | +/-1% | ||
| Ripple | <3% | ||
| Configuration | SCR Based | ||
| Ingress | IP20 (optional 2x,3x,4x,5x,6x) | ||
| Auto / Manual | Can be select through switch | ||
| Enclosure Type | MS Fabricated | ||
| Colour | RAL 7032 | ||
| Indication | a) Mains ON | ||
| b) Charger ON | |||
| c) Float ON | |||
| d) Boost ON | |||
| e) Battery Low | |||
| f) Reverse Battery | |||
| g) Earth Fault | |||
| h) Filter Fuse Fail (optional) | |||
| i) Blocking Diode Fail (optional) | |||
| Input | Protections | ||
| a) MCB / MCCB | |||
| b) Over Voltage | |||
| c) Under Voltage | |||
| d) Surge Suppression | |||
| Output | a) Over Voltage | ||
| b) Under Voltage | |||
| c) Over Current | |||
| d) Short Circuit | |||
| e) Soft Start | |||
| DCDB | a) As Required | ||
| Meter | a) Input Voltmeter | ||
| b) Output Voltmeter | |||
| c) Output Ammeter | |||
| Climatic Conditions | |||
| Operating Temperature | 20 to +55 degree C | ||
| Product | Three Phase SCR Based Battery Charger | |||||
|---|---|---|---|---|---|---|
| Capacity | 5 to 20 KW | 25 to 50 KW | 60 to 80 KW | 90 to 125 KW | 150 to 200 KW | 225 to 300 KW |
| Input Voltage | 415VAC 3PH +/-10% Any Factory Configurable | |||||
| Input Frequency | 50Hz Any Factory Configurable | |||||
| Float Voltage | Any Factory Configurable | |||||
| Boost Voltage | Any Factory Configurable | |||||
| Float Current | Any Factory Configurable | |||||
| Boost Current | Any Factory Configurable | |||||
| Regulation | +/-1% | |||||
| Ripple | <3% | |||||
| Configuration | SCR Based | |||||
| Ingress Protection | IP20 (optional 2x,3x,4x,5x,6x) | |||||
| Auto / Manual | Can be select through switch | |||||
| Enclosure Type | MS Fabricated | |||||
| Colour | RAL 7032 | |||||
| Indication | a) Mains ON | |||||
| b) Charger ON | ||||||
| c) Float ON | ||||||
| d) Boost ON | ||||||
| e) Battery Low | ||||||
| f) Reverse Battery | ||||||
| g) Earth Fault | ||||||
| h) Filter Fuse Fail (optional) | ||||||
| i) Blocking Diode Fail (optional) | ||||||
| Input | Protections | |||||
| a) MCB / MCCB | ||||||
| b) Over Voltage | ||||||
| c) Under Voltage | ||||||
| d) Surge Suppression | ||||||
| e) Single Phase Preventer | ||||||
| f) Phase Reverse Protection | ||||||
| Output | a) Over Voltage | |||||
| b) Under Voltage | ||||||
| c) Over Current | ||||||
| d) Short Circuit | ||||||
| e) Soft Start | ||||||
| DCDB | a) As Required | |||||
| Meter | a) Input Voltmeter | |||||
| b) Output Voltmeter | ||||||
| c) Output Ammeter | ||||||
| Standards Followed | ||||||
| IS5921/1249 | Copper cladbase material in electrical/electronic equipment's | |||||
| IS6297/2026 | Transformers and inductors. | |||||
| IS 6553 | Environmental requirements for semiconductors and Integrated circuits. | |||||
| IS4064 | Airbreak switches | |||||
| IS8828 | MCBs | |||||
| IS 9224 | HRC fuses | |||||
| IS1248 | Indicating instruments | |||||
| IS 6619 | Semiconductor Rectifier equipment safety | |||||
| IS613 | Copper busbars | |||||
| IS2959 | Contactors. | |||||
| IS3231 | Electrical relays | |||||
| IS13703 | Low voltage fuses | |||||
| IS4540 | Mono Crystal line Semi conductor rectifier assembly | |||||
| IS4237 | General requirements for switchgear and control switches | |||||
| IEC62040-2 | Electro magnetic conduction and interference. | |||||
Operational Advantages
- Improves equipment reliability and process stability
- Reduces risk of downtime caused by power issues
- Supports safe operation of sensitive loads
- Designed for dependable performance in industrial environments
Business Advantages
- Extends asset life and lowers maintenance burden
- Improves productivity with consistent power quality
- Offers scalable solutions for diverse industries
- Backed by experienced engineering and service support
Our Expertise
- Aviation
- Machine tool industry
- Food industry
- Automobile industry
- Oil and natural gas industries
- Chemical, petroleum, and pharmaceutical industries
- Textile industries
- Defence and research institutes sectors
* Due to VCS Policy of continuous improvement in product quality, some feature and Size of items may change.
Note: We also offer customized solutions tailored to specific customer requirements.
Our Global Presence
USA (Sales & Support)
Address
350 Fifth Avenue, Suite 4500,
New York, NY 10118, USA
New York, NY 10118, USA